89 Cheyenne aka Sour Girl

[dagen_1]

Take a page out of F1 and put a couple air cylinders on the frame. Already have air, just open a valve and jack it up.

that sounds expensive... lol

 

[SCOTTYINWV]

got to thinking..... (scary i know...) might start carrying another receiver with me without a ball on it.... if i lose air in the rear, i can get a jack under the receiver and lift her up. (with the receiver flipped over for more clearance)

You must be registered for see images attach

genius!

 

[dagen_1]

i guess a 4" drop receiver would be better for it.. but i'll toy around with it.

 

[Jizanthapus]

got to thinking..... (scary i know...) might start carrying another receiver with me without a ball on it.... if i lose air in the rear, i can get a jack under the receiver and lift her up. (with the receiver flipped over for more clearance)

You must be registered for see images attach

Do this.

 

[ccreddell]

I used to carry a 24" 2X4 and a 6" 4X4. When I had a flat, Id stick the 2X under the frame and over the 4X and lever it up enough to get the jack under it.....and I was static.

 

[dagen_1]

took the bed off and got a good start on the air managememt today. I had made a few miscalculations on a couple things, but managed to work around the issues and i'm pretty satisfied so far wtih the progress.

You must be registered for see images attach

You must be registered for see images attach

 

[bow61509]

Looking good!

Sent from the big block!

 

[jmig]

Looking good DeWayne!

 

[DRAGGIN95]

Looking good!

 

[dagen_1]

thanks guys... i got to play with the welder and plasma cutter today.. might not be the prettiest tank bracket.. but it won't be seen with the bed on and i can say it's the first tank bracket i've made.. haha


i messed up on the hydraulic hose and got it TOO long... so i'm routing it up the passenger side, then crossing over at the gas tank crossmember. that route takes all the extra slack out pefectly.