SkyHighColorado
^LIFTED^
OK I have every conflicting information in the instructions. How do you do the automatic transmission shift linkage? I am installing the PA 3" kit 88-94. PA instructions say: "a. Lenghthen the transmission shift rod. b. Scribe a line along the shift rod just above the first bend at the top of the linkage rod. c. Cut the shift rod through the scribed line. d. Place shift rod extension between the two pieces of the shift rod. Align the scribed line and weld the extension in place."
Zone instructions I made a copy of before returning it say: " remove the shift linkage connecting the steering column to the transmission. Remove the retaining pin at the transmission and remove the linkage. Loosen the adjusting bolt and slide the rod out of the adjuster sleeve."
Why am I so confused? I need a better explanation please asap.
Zone instructions I made a copy of before returning it say: " remove the shift linkage connecting the steering column to the transmission. Remove the retaining pin at the transmission and remove the linkage. Loosen the adjusting bolt and slide the rod out of the adjuster sleeve."
Why am I so confused? I need a better explanation please asap.