411 swap

[Christian Steffen]

[email protected]

Sent.

Could I please get the pin out information , 1998 , 4 wheel drive , manual 5 speed , 5.7 liter .
[email protected]

Sorry, can't help with 5.7 trucks.

I think another member on here told me to e-mail Lextech directly,

I didn't realize the 96-97 PCM was different? Does it say it in the thread dedicated to the 411 swap?

The 96-97 ecms have 5 plugins, whereas the 98-00 ecms have 4.

 

[Spode]

You must be registered for see images attach

Got mine completed tonight. Runs great!!!

 

[jonny5islive]

i was wondering if i could the pin -out on 98-00 trucks to 411 pcm , email.. [email protected]

 

[gstubbz]

Sent.


Sorry, can't help with 5.7 trucks.



The 96-97 ecms have 5 plugins, whereas the 98-00 ecms have 4.

Received your email, thank you!!

 

[Eskimomann209]

Lol GUYS!
Lex specifically asks NOT to share his sheets!

Did you get his email?
I usually get a response within a day if emailed direct

Not sure how old the ones recently sent are but he has some relatively recent updates...

 

[Eskimomann209]

For the record, when I did mine I had a TERRIBLE time finding someone who understood how to do the crank relearn

 

[jonny5islive]

Lol GUYS!
Lex specifically asks NOT to share his sheets!

Did you get his email?
I usually get a response within a day if emailed direct

Not sure how old the ones recently sent are but he has some relatively recent updates...

 

[jonny5islive]

I did email lextech ,just waiting for reply ..

 

[redfishsc]

Did you do front and rear gears?

Sent from my LG-H820PR using Tapatalk

Mine is just a 2wd, so just the rear. My pinion and carrier bearings were starting to sing loundly (raspy scrapy sounds) so while replacing the bearings I swapped in a 4.11 and an Eaton Truetrac. Best mod I've ever done. If it had been a 4wd, I probably would have stayed with the 3.42 it came with just because of the double work/double expense.