rigsboo
Newbie
Ok so my truck turns over but wont start
Im getting a code for crank relearn...doesnt the truck have to be running to do a crank relearn?
Could that cause it not to start?
Let me start from the beginning, truck wouldnt start due to fuel issue (new pump) used a noid light and the injectors were firing...pulled the upper intake pulled the injectors one by one and only 4 were spitting fuel while cranking so...i replaced injectors and did a 411 swap at the same time...still wont start...it cranks but wont start...if i spray syarting fluid in itll start then die just lile before codes before were none at all...now i have 2 P1336 (crank relearn) and P0452 ( evap? Its a 97 so i think i need to add a wire for my egr?) What is my problem??! Im starting a new job monday and need help ASAP
Im getting a code for crank relearn...doesnt the truck have to be running to do a crank relearn?
Could that cause it not to start?
Let me start from the beginning, truck wouldnt start due to fuel issue (new pump) used a noid light and the injectors were firing...pulled the upper intake pulled the injectors one by one and only 4 were spitting fuel while cranking so...i replaced injectors and did a 411 swap at the same time...still wont start...it cranks but wont start...if i spray syarting fluid in itll start then die just lile before codes before were none at all...now i have 2 P1336 (crank relearn) and P0452 ( evap? Its a 97 so i think i need to add a wire for my egr?) What is my problem??! Im starting a new job monday and need help ASAP
Last edited: