Engine Oil Cooler lines are built and replaced. Old lines didn't want to come out of the block, that was the biggest struggle. Lots of use on the pump for the 4-post lift today, sure glad I had it.
Old leaky lines and OE hookup at the block.
You must be registered for see images attach
You must be registered for see images attach
Super impressed with Vibrant's packaging. All -8 AN fittings and braided hose.
You must be registered for see images attach
Hard lines cut and compression fittings installed.
You must be registered for see images attach
Completed lines with extra loom for abrasion protecion.
You must be registered for see images attach
New lines installed.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
The whole project took a little longer than I had planned, but it's done now, and I don't have worry about those lines leaking for some time. Notice a few other seap type leaks, probably have to do a front cover and pan gasket at some point. Tightened up a power steering pump line as well, wasn't leaking but wet.