LCALDERA98
I'm Awesome
is there any performance air intake manifold ? I have the efi
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
im not worried about the cost and i dont plan on keeping the stock injectors i just wanted to know if there's a intake manifold that would work with my motor
i was just about to suggest the Ram-Jet setup. But even then, I do believe a decent amount of things will need to be changed.The pacificp and ppediesel threads are inaccessible even though they pop up on the Google machine. They had a lot of good info and Hog claimed noticeable gains from 3000+ over stock. The 3 bolt intakes like I have are apparently impossible to find anymore. But the real appeal to is, at least for me, was the fact that the Whipple would fit it and allow the use of normal injectors. We're I to be NA, the Ramjet would also be a decent, albeit not cheap, option. They even quit making the plenum spacer so your options are pretty limited. With a stock motor though, there is cheaper lower hanging fruit.
I have a marine intake setup if you're interested in a semi-stock set up. Cast lower, aluminum upper complete with fuel rails, fuel regulator and 8 injectors as well as 8 injector connectors. Just bolt on your stock throttle body. Or you can get a Holley 300-263 vortec style intake as a starting point for an aftermarket conversion. You'll need an EFI elbow to accept a new 4 bolt throttle body and new injectors as well as connectors and fuel feed connections.is there any performance air intake manifold ? I have the efi