Taconic
Newbie
Thanks for the advise. I removed the drivers side dash grille without any damage. I have ordered the Kappas. Cheers
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
He's right. I have a 90. I used a driver with interchangeable bits & only used the bit. Mine came free with a little patience. 30 years of sunlight was not kind to them.There are 2 metal clips in the front and tabs in the back. Carefully pry up at the front corners until the clips release, then pull the covers up and toward you. Be very careful or the clips in the front will break. You can accomplish this with a flat blade screwdriver.
If you break the plastic at the clip, you always have velcro as an option!Thanks for the advise. I removed the drivers side dash grille without any damage. I have ordered the Kappas. Cheers