A
Archaic2021
Latest activity Postings About
-
-
AArchaic2021 replied to the thread What to prepare for before I rip into engine.....The only thing I have does is swap plugs from other cylinders and it remains missife on cyl 2
-
AArchaic2021 replied to the thread What to prepare for before I rip into engine.....Would bad valve stems cause a missifire letting oil into cylinder or too much air. I'll grab a tester and test it to be sure, make sure...
-
AArchaic2021 replied to the thread What to prepare for before I rip into engine.....I smell gas on cyl 2 plug
-
AArchaic2021 replied to the thread What to prepare for before I rip into engine.....What should plug wore look like on spark o disconnect the plug wire and laid it on metal and it was arcing but didn't seam consistent...
-
AArchaic2021 replied to the thread What to prepare for before I rip into engine.....Apark plug cyl 2 on the right. Cyl 4 on the left. I have thought about just driving it and fixing all the other odd and ends and...
-
-
AArchaic2021 replied to the thread What to prepare for before I rip into engine.....When I do drive it it actually smoothes out. I know its like a 99.9 percent chance that a fuel filter would cause a miss on one...
-
AArchaic2021 replied to the thread What to prepare for before I rip into engine.....I did swap plugs with another one but same result. I don't have any for sure evidence of it. I did turn on bolt I could reach on the...
-
AArchaic2021 replied to the thread What to prepare for before I rip into engine.....I've already pulled valve cover and valves are opening correctly. Spark is there..and by there I mean I laid the plug wire on metal and...
-
AArchaic2021 posted the thread What to prepare for before I rip into engine.... in Engine Performance + Maintenance.So I'm finally gonna tear into grandads truck and fix this Cyl 2 missfire. Here is the Skinny. My grandad has had the truck for hte...
-
ANeeding to replace the ball joint on driver side....was gonna buy a new a arm so I wouldn't have to drill out rivets..bit does this look...
-
-
AArchaic2021 replied to the thread #2 Misfire at Idle, Random/Multi While Driving.Any luck with your issue...I got a missfire on cyl2 thats driving me crazy
-
AArchaic2021 replied to the thread Intake leak? Head gasket failure?.I hope that's all it is, the truck right now just goes on a 10 minute trip to the gas station and back right now but I need to get it...
-
AArchaic2021 replied to the thread Intake leak? Head gasket failure?.Did a pressure test no visible leaks. Guess it's time to rip the intake off
-
AArchaic2021 posted the thread Intake leak? Head gasket failure? in Engine Performance + Maintenance.So my 97 silverado 5.0 vortec is having issues Misfire on cylinder 2 Plug shows some contamination Compression is 150lbs on this...
-
-
Loading…
-
Loading…
