Wagonbacker9
One string banjo. Maybe 2
so if i dont have the money to re gear can i put the 1 ton leaf spring assemblys on my 1/2 ton and have them sitting on the 10 bolt?
Sure, or you could just not re-gear it and leave it in 2wd?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
so if i dont have the money to re gear can i put the 1 ton leaf spring assemblys on my 1/2 ton and have them sitting on the 10 bolt?
so lets say i put in the 14 bolt in the back. if i have a front diff out of a 2500 can i just unbolt the 1500 diff in the front and put in the 2500 diff?
Nope... swapping to the 2500 (8 lug) IFS running gear in a 1500 is more work than it is worth. If I understand correctly, you basically need everything off the front end of the 2500 (axle control arms, half shafts, knuckles, etc etc) in order to make it work.
Replace the word "Frame" with "truck"be easier to just swap a whole frame
Replace the word "Frame" with "truck"
Then you have 2 trucks... LOLnow where is the fun in that
Then you have 2 trucks... LOL