harness

  1. J

    Wiring harness swap from 6.5 to 5.7

    Hey all, i have a 96 k3500 that had a blown 6.5 in it and i am swapping in a 350 out of a 96 Tahoe. I have a Nv4500 out of a 2000 k 2500 that was bolted up to a 350 that i will be putting in this truck as well. I took almost the entire wiring harness out of a junkyard 96 k1500 truck ( computers...
  2. Amsterdamned96

    Novice seeking help (wiring/engine rebuild)

    Fellow GM truck enthusiasts, Some time ago I made a thread dubbed “502 Accel 3500” with a different username. I was handed down a truck that was turned down by various garages/mechanics where I live. The harness was damaged severely due to a fire/excessive heat. I thought the air-intake was a...
  3. L

    BULKHEAD HARNESS DIAGRAM?

    So, first things first, I did my research and wanted to see your guyes opinions or knowledge. So I have an 93' LS swapped Cheyenne Single cab. I was working to get some wires ran into the cab and i made a bigger hole on top of the bulk head connector and I kind of burned or tore up a wire or two...
  4. R

    Wiring harness interchangeable?

    Hello all, new to forum, I have an 89 Scottsdale, (single cab 2wd) that I picked up for free. It had a dash fire from an improperly installed breathalyzer. My question is: what wiring harness can I use? Can I use harness from a 2500? Can it be from a higher trim and not use the connectors...
  5. LoCascio_Inc

    Help Needed - Rear Speed Sensor Wiring Leads to Nowhere. w/ PICS

    1998 K2500 ECSB has had a code C0236 (missing rear speed sensor) since purchased. I disassembled the wiring harness to look for a short and revealed that the wires from the rear speed sensor on the transfer case output terminated at another connector with a female to female adapter about 18"...
Top