Search results

  1. kidd666

    Proportioning valve removal

    Ok I have a 94 k1500 and I have swapped in a 01 rear end with disc brakes. Have also done the NBs master cylinder swap. But my rear brakes will lock up before the front. So if I were to remove the rwal and the proportioning valve would that solve my problem? I have an adjustable proportion valve...
  2. kidd666

    Head gaskets

    I have a 94 k1500 5.7l with a partially blown head gasket. Truck has 140xxx miles. Should i just fix the head gaskets on it or rebuild the whole motor? Sent from my SM-G935P using Tapatalk
  3. kidd666

    Offset

    Looking at getting some new wheels for the truck soon and want to see what offset people are running and what it looks like on your truck. If you could post pics to help me out it would be much appriciated Sent from my SM-G935P using Tapatalk
  4. kidd666

    2000 gm 10 bolt swap help

    Ok so I got a 2000 chevy 10 bolt I'm going to be swapping into my truck today. It has disc brakes. My question is that I have the nbs master to put on it but will I need to remove the stock proportioning valve to make this work?
  5. kidd666

    Need measurement

    I have an rcd 6 inch lift and a 3 inch body lift with 315 75 16s and I want to know what people's measurements between the top of tire and fender is. Truck doesn't look tall enough for what's on it Sent from my SM-G925T using Tapatalk
  6. kidd666

    Nv4500 to 4l60e

    On a 95 k1500 how hard would it be to swap a nv4500 to a 4l60? And what will I need to do it Sent from my SM-G925T using Tapatalk
  7. kidd666

    prerunner 4x4 or 2wd

    want to see pics of some prerunners 4x4 or 2wd and some info on the suspension if you have it.
  8. kidd666

    99 and up a arms

    will the upper and lower control arms off of a 99 or newer work on our trucks? that and i know its not a 400 but would they work on a 73 c20 with a little modification?
  9. kidd666

    High idle help.

    Ok so I replaced my intake manifold gasket yesterday and the truck won't idle right. The idle stays around 1000 to 1200 rpms. I need some help idk what to do or where so start. It's a 94 k1500 5.7l sent from your moms house
  10. kidd666

    Sub box help

    Ok I have a kicker l7 15 in a ported box in my truck right now but I want to try and make a louder one. I know there are some bass heads here. I want to make a 4th order box for it and was wondering if anyone could help with a design? sent from your moms house
  11. kidd666

    94 6.5 diesel won't start

    Ok I'm trying to get a friend's truck running. It's been sitting a while and my dad had fired it up about 2 weeks ago now but this past weekend it wouldn't fire up. It just cranks and doesn't want to start. Any ideas what I should look at? sent from your moms house
  12. kidd666

    Tail light short?

    Ok so before I got my led tails my driver side brake light would work when it wanted to. I figured it was the circuit board so figured the led tails would fix it. Now I find out today that my drives brake still works when it wants to. Where should I start looking? And when should I look? Because...
  13. kidd666

    Red plasti dip

    Does anyone know what shade of red the plasti dip is. Thinking of painting some stuff with it but not sure if it will match my truck sent from your moms house
  14. kidd666

    SAS help

    Ok I got an axle off of a 76 chevy. I'm going to do a solid axle swap. I'm going to be getting a 208 transfer case off a 87 1/2 ton with a 700r4. From what I've read it should bolt up to my 4l60e I just need an adapter for the speedo. I'm looking at the SAS conversion kit from or and a cross...
  15. kidd666

    SAS t case help

    OK I have had some parts fall into my lap and wanted to see if it would work out. I have a 1/2 ton 6 lug axle from a 76 k10, and a 208c transfer case from an 87 1/2 ton truck. Could I make this work with my 4l60e tranny on my 1500?
  16. kidd666

    bumper or roll pan

    I got rear ended a couple days ago. and im in a debate over weather or not to go with a roll pan or another bumper. any thoughts? haven't seen many 4x4s with roll pans
  17. kidd666

    69 c10 conversion

    How hard would this be to accomplish on one of our trucks. I'm just thinking hear but since hot August nights is in town its got me wanting to swap my cab for a c10 cab. What kind of difficulty s would I need to work through
  18. kidd666

    94 k1500 exhaust redo

    I'm looking at redoing my exhaust. I want to hollow out my cat, get a set of shortie headers. I'm open to sugestions on brands or parts. Need the cat to remain in place for inspection but I will pass smog with it hollow. Currently I have a flow master 40 with no tips. I want to dump it over the...
  19. kidd666

    Want more power out of my 350

    How much more power would I get out of my tbi 350 if I were to put vertec heads on it? Also what parts would I need to do this? Sent from my SAMSUNG-SGH-I717 using Tapatalk
  20. kidd666

    Bed rack

    Has anyone made one or thought of doing it. Looking for opinions on it. Thinking of doing one want to do a roof top tent on it and be able to store my spare and camping supplys. Possibly a couple jerry cans too. Looking at doing one like this But with the light type set up like this Sent...
  21. kidd666

    new sig please

  22. kidd666

    Wheel backspacing

    I'm wanting to see some peoples backspacing on their wheels. I'm starting to look into getting some wheels but I want them to stick out past the fender a little bit. Maybe about an inch or so. Want to see what some backspacing's look like. Thanks in advance Sent from my SAMSUNG-SGH-I717 using...
  23. kidd666

    lifted one ton

    this thing has been for sale for over a year around me and I wish I had money to buy it. its less then what I paid for my truck http://reno.craigslist.org/cto/4103426036.html
  24. kidd666

    Kenda klever mt

    Has anyone had these tires or even heard of them and if so what do u have to say about them. For 660 for 4 shipped seems like a good deal Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
  25. kidd666

    Tb spacer help

    I installed a Tb spacer on my truck today and now my service engine soon light is on the.truck smells like its running rich and at start up weather the truck is cold or warmed up it hesitates and almost dies but then idels back up and then idels fine? Im clueless as to what to do. Besides those...

Latest posts

Staff online

Members online

Total: 1,099 (members: 16, guests: 1,083)

Forum statistics

Threads
64,448
Messages
1,394,242
Members
51,689
Latest member
DeeSee

Share this page

Top