You must be registered for see images attach
this part of dash harness is connected with wiper motor plug but I can’t find or remember where these three went please help ..my truck is a 1992 the dash and engine harness came from 1993-94 extended cab
Greetings k-Z-v,
Welcome to the GMT400 forum. I think you'll find this place full of folks who enjoy keeping
this generation of the General's trucks & SUVs on the road.
First things first, according to the '92 Factory Service Manual
@AK49BWL's comment on the
connector in the lower RH corner of your photo is on the money:
The connector on the bottom right of the picture is to connect your cruise control switch on the column and should be part of a cruise-control-dedicated harness.
You must be registered for see images attach
(From the '92 C/K Light Truck Wiring Manual -- download your copy over here:
'88+ GMT400 FSM cache)
For the entire page that the above came from, see attachment #1 below.
As for where C226A is physically located, according to the Component Location listing it's below
the steering column.
Do yourself a favor and upload the '92 Factory Service Manuals. Armed with these resources there will be 1/100
of the mystery that presents itself when it's just man vs machine in wiring harness land.
Hope this helps. Best of luck putting your ride back together.
Cheers -