The Stupid Interior Questions Thread

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bow61509

GMT400 Thug Life!!
Joined
Dec 7, 2010
Messages
9,310
Reaction score
164
Location
Texas
I would think if you swapped the inner panels between the two sets of doors it would work fine. When you take the door panel off there is another piece that's held on to the door via several small screws. You take that off to gain access to the inside of the door, the window regulator and all the handle armrest mount etc is on this panel. Swap that between the two doors and I think your golden! If that makes sense

sent from the...... ferd
 

TylerZ281500

Yukon Ridin High
Joined
Mar 13, 2011
Messages
5,861
Reaction score
254
Location
Clinton Township, Michigan
i did the opposite way before, swapped the 96 panels into a 93. but take the handle rods and everything out from the 96 door that you can and put it in the 90 one or vice versa. you could get lucky just swapping some parts but itd be a hell of a lot easier to swap everything from one door to another.
 

Poseidon

OBS Enthusiast
Joined
Sep 26, 2013
Messages
56
Reaction score
1
Location
Mason
Thanks for the info. I hope i can get it all gutted and swapped in a weekend. Is there any door differences like speaker holes or vents?
 

lowreese26

I'm Awesome
Joined
Nov 10, 2010
Messages
201
Reaction score
12
Location
Las Vegas
My seat feels like its wobbling....Its annoying more than anything. I think I read over on FSC that the frame/brackets have problems with cracking/breaking. And I have no idea how to take the seats out.....Electric Leather Buckets....


I'm having this problem as well. Anybody fix this or do I need to replace the seat?
 

sewlow

Bitchin' Stitchin'
Joined
Jun 22, 2011
Messages
12,432
Reaction score
5,806
Location
Abbotsford B.C., Canada.
I'm having this problem as well. Anybody fix this or do I need to replace the seat?

The frames do break. Usually at the pivot or hinge where the bolts go through the frame, or the weld breaks in that area.
Could be just a loose bolt to. Don't know till you do some inspection.
I think that made sense.
I could help you through the re-&-re of the covers, but later in the weekend. First major car-show this weekend & I'm dealing with the 'last-minuters'! Done 39 hours in the shop in the last 48!
Baddadeebbaddadeebbaddadeeb! More 'Monster' please!
 

Blakestuhh

I'm Awesome
Joined
Dec 31, 2012
Messages
1,053
Reaction score
21
Location
USA
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach


Is this worth 75? I'm talking to some guy and that's what he said?!
 
Last edited:
Top