ASL311
Newbie
Hey all.
Problem: Using both the key fob, and the lock / unlock switch on both doors, the drivers side works fine, passenger front will lock but not unlock, and all rear doors are not etting power. Fuse 13 keeps blowing after a few uses of the lock.
The power lock relay is getting power from the signal wire, but now power from the unlock output(tan wire). I replaced the relay and it did not fix the problem.
I have the cigarette lighters / outlets (all 3) coompletely disconnected with no change.
The ground for relay is secure, and no change with bypassing.
I bypassed the relay by connecting the Orange hot wire to the tan unlock wire with no luck.
The wiring diagram shows all 5 doors connected under the dash. I find it hard to believe that if there was an issue with thast junction, that 1 of the doors would still work.
The kyless entry module has built in door relays (to my best understanding) and you can hear an audible click when hitting the unlock bottom on both the fob and the door.
What am I missing?
Problem: Using both the key fob, and the lock / unlock switch on both doors, the drivers side works fine, passenger front will lock but not unlock, and all rear doors are not etting power. Fuse 13 keeps blowing after a few uses of the lock.
The power lock relay is getting power from the signal wire, but now power from the unlock output(tan wire). I replaced the relay and it did not fix the problem.
I have the cigarette lighters / outlets (all 3) coompletely disconnected with no change.
The ground for relay is secure, and no change with bypassing.
I bypassed the relay by connecting the Orange hot wire to the tan unlock wire with no luck.
The wiring diagram shows all 5 doors connected under the dash. I find it hard to believe that if there was an issue with thast junction, that 1 of the doors would still work.
The kyless entry module has built in door relays (to my best understanding) and you can hear an audible click when hitting the unlock bottom on both the fob and the door.
What am I missing?