MrPink
Bainisteoir Páirteanna
For the drop in and go scenario you need the little converter/flexplate adapter(ICT Billet 551165), I used ICT motor mount adapters(551628) and did my own harness. If your donor engine and harness are from a truck with a 60e then you don't have to worry about wiring the trans in as it will be plug and play. If the your truck/suv was 95 and older then you have to do some additional wiring. Your best bet is to spend the $ and get someone like Brenden form Lt1swap.com to tune out your vats and anything else you don't need. Look for companies or individuals that are willing to make you a 100% plug and play harness, if you are not fond of wiring. It's not the cheaper route, but it will be easier in the long run.