If you remove that garage door opener door, (Yes. That's actually what it's for!) a lens from an S-10 overhead light snaps right into that opening.
The tabs on the lens actually match up & snap into pre-existing holes in the console.
The fit is slightly loose, but a needle or pliers heated up can be used to slightly melt/bend the tabs on the lens from the backside of the console when the lens is installed, to get it to fit just that much better.
Operative word is 'slightly'!
Don't bend the tabs so much so that if you ever have to replace the bulb, the console has to be removed in order to get the lens off.
Throw in an LED festoon bulb or two. Wire it up into the dash light rheostat as the original O/H light is.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
...or...
Go BIG & r-e-a-l-l-y bright!
There's room for 2 or 3 of these, depending on what size you get.
You must be registered for see images attach