Overhead console swap into 93 RCSB ?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

old rusty

Newbie
Joined
May 31, 2021
Messages
7
Reaction score
6
Location
Ohio
I think I've read awhile ago that the regular cab OBS trucks have the provisions in the steel inner roof structure to install an OEM overhead console, is this correct or do I have to do some creative installation like self tapping screws ? It was a straight forward install in my extended cab plow truck. Any info would be appreciated.
 

Attachments

  • IMG_0905.jpg
    IMG_0905.jpg
    106.6 KB · Views: 1

HotrodZ06

GMT400 Collector
Supporting Member
Joined
Apr 30, 2016
Messages
193
Reaction score
256
Location
Lake Texoma
In my RCLB it had no provisions but, my ECSB did have the provisions. In the RCLB I had to center the front drill the hole for the front screw cut the legs off the back and center rear then put 2 screws inside the CD holder compartment.
 
Top