Baron "mean green" is who makes the 4hi kit, also i plugged my high beam hids into my lowbeams while installing my 4hi kit and they didnt turn on so unless theres something i dont know about that i dont know that running highs will work in your low beams
That shouldn't make a differance Danny, all HID kits are either 35W or 55W Ballasts and the bulbs bases are the only other difference. So if one will work in your High Beams it should work in your lows as well. Did you accidentally have the plug flipped the wrong way? I know when I installed my HID's I had the plug 180* off and they didn't fire, then turned the plug 180* and they worked like a charm.
Regardless, if anyone is going to run HID's in there high beams and low beams or just one one of the two, I would recommend having a good Heavy Duty Relay Harness of somesort to pull the power from the battery instead of the little 16-18 gauge OEM wire that pulls from the switch. It also makes a differance in light output also, becuase the OE wiring only delivers about 10.4 Volts to the battery, where as when a HD harness is installed they get the full 13.8 Volts at the headlights.