CarolinaOBS
ZIP TIES AND PB BLASTER
Progress
You must be registered for see images attach
xc_hide_links_from_guests_guests_error_hide_media
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Progress
You must be registered for see images attach
xc_hide_links_from_guests_guests_error_hide_media
I can get some and post them, basically popped through fender liner and tucked on outside of frame rails on both sides. Tires don’t even get close.Looking good!
Any pics of your intercooler routing?
I can get some and post them, basically popped through fender liner and tucked on outside of frame rails on both sides. Tires don’t even get close.
Busy weekend so far, threw and exhaust on the truck so hopefully it will pass inspection . Dumped the 4” pipe from under the bedside until I fully decide where I want to run it. Then I drove it an hour each way on the highway to the junkyard to pick up a 6.0 and 4l80e. She does ok on the highway. Still has sone minor exhaust leaks in the engine bay.
You must be registered for see images attachYou must be registered for see images attachYou must be registered for see images attach
Awesome lol thanks
Whoops!Play with fire and you’re bound to get burned. 10.5:1 compression, pump gas, a little too much timing, and a 11 psi pull equal a dead cylinder.
good thing I got a spare short block lying around.
You must be registered for see images attach
Not quite a pro tuner yetWhoops!
Just ignore the doo doo looking welds. I was teaching myself to tig weld aluminum . They don’t leak tho.
You must be registered for see images attachYou must be registered for see images attachYou must be registered for see images attachYou must be registered for see images attach
Play with fire and you’re bound to get burned. 10.5:1 compression, pump gas, a little too much timing, and a 11 psi pull equal a dead cylinder.
good thing I got a spare short block lying around.
You must be registered for see images attach