Gearheadmike
OBS Enthusiast
Can the dist in a vortec v8 5.0-5.7 be set in off 1 tooth and still run or will it instantly throw a cel?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
If you timing is set with a code reader to 0 or 1 or even close, I don't see how it could be off 1 tooth. If your off 1 tooth, the truck will run like crap. It wont hurt to check though.Btw when i got my alignment done the guy was nice enough to hook is live data up and with some small movement of dist i got the cmp set to between 0 and 1 but we had to rush before he opened shop that morning. And truck still cranked hard afterwards. Maybe my starter is just getting heat soaked?
Btw when i got my alignment done the guy was nice enough to hook is live data up and with some small movement of dist i got the cmp set to between 0 and 1 but we had to rush before he opened shop that morning. And truck still cranked hard afterwards. Maybe my starter is just getting heat soaked?