someotherguy
Truly Awesome
Any adapters that will get you the bolt pattern change will need to be at minimum .75" thick which starts making those wheels look like a poor choice for a lowered application. I've seen it done but man they ride CLOSE to the fender lips.Hey guys Im back. While Ive been away, I managed to find a set of 2011 Camaro Base Model wheels that literally had 10 miles on them. Silly me only looked up pictures on camaro wheels on the truck thinking theyll fit. Lol you already know. That being said. Whats the best adapters I can use
Anyway EZAccessory can hook you up, just be sure you are really, really specific about what you need so there's no misunderstanding. They have good stuff but as you might imagine it's easy to get details confused and end up with the wrong item.
Also very important, when you go with the thinnest possible adapter, you'll probably find out the studs on the truck are longer than the adapter and will poke out against the wheel's mounting surface. SOME wheels have pockets in them that will prevent any interference, some don't; if there is any contact at all you will need to cut your truck's studs off short.
Those pattern change adapters aren't cheap so you better do a lot of measuring and mocking up before you commit.
Richard