The Stupid Interior Questions Thread

[The Arctic Fox]

What if I just switch the whole seats? The powered seat is slow anyhow, I actually prefer the manual. But I LOVE my armrest, that's where I get stuck on that route.

just find some seats at the junkyard to replace them.

 

[sewlow]

The cushions may be able to be changed. 'May!' They'd need some stitching done to the bands (outer sides & front). Wouldn't be a straight swap. The back rests...no!

 

[kyviabama]

Our junkyard is nasty! There's no telling what I'd catch from sitting in one of those seats, yuck!

I can sew, have a machine also. Guess ill just have to dive into it.

Thanks for the help.

 

[Blakestuhh]

Does anyone have pictures of their dash cup holders on an 88-94 or write up? I've had a set for years but never got around to installing, I know I have to drill a hole but not inch else. So if anyone can help I'd appreciate it!

 

[slippy3002]

Does anyone have pictures of their dash cup holders on an 88-94 or write up? I've had a set for years but never got around to installing, I know I have to drill a hole but not inch else. So if anyone can help I'd appreciate it!

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Sent from The best there is, The best there was, and The best there ever will be.

 

[SCOTTYINWV]

If I find one of these cup holders in the yard, what all do i need to get? How does it mount?

 

[Sampuppy1]

Rob is that a 5 speed?


Tyler/T-Unit

 

[94Sierra4x4]

If I find one of these cup holders in the yard, what all do i need to get? How does it mount?

When you remove the cup holder from a truck, you will have everything you need.
IIRC.. 2 screws, MAYBE 4.... Then it slides/clips in to the dash. Pretty certain.. was doing a lot of other tearing apart when that came out.

 

[Blakestuhh]

Yeah mine didn't come with them so I heard I have to mock it up and drill a hole by the ash tray and screw it in there. That's why I was wanting to get pics of underneath before I go drilling my dash lol

 

[KReePiN]

Yeah mine didn't come with them so I heard I have to mock it up and drill a hole by the ash tray and screw it in there. That's why I was wanting to get pics of underneath before I go drilling my dash lol

I didnt have to drill anything on mine......it used 2 holes that are already existing on the bottom of the dash......you just remove the 2 screws,put your cup holder into position and the replace the 2 screws.