TBI injector harness grommet.

[IndexOf0]

I'm having trouble sourcing this grommet as mine has become brittle. Does anyone know if any companies reproduce them? Also, does anyone know what kind of terminals are used inside the injector pigtail? I imagine I'm going to have the cut the wires if I replace it. So I'm either going to put a 4 pin weatherpack connector in or new injector pigtails. Thanks for the help.

You must be registered for see images attach

 

[PlayingWithTBI]

You may be able to get some help from these guys?

http://www.rvmorsemachine.com/

https://www.ebay.com/str/sprperformance

 

[chevman_88]

Best bet is likely gonna be a junk yard or ebay. Those connectors come apart fairly easily and I think you can pull each wire through the grommet one at a time once the connector is disassembled. Just make sure to take pictures of what wire goes where.

 

[Schurkey]

Remove the old grommet. Stabilize the wires where they go past the grommet area. Fill in the gap with Permatex The Right Stuff, or perhaps RTV Silicone. Let the stuff set up. Done.

I'd expect The Right Stuff will last longer than RTV Silicone.