Switch for power door locks

[homermacleod]

I have a 98 Cheyenne with a viper alarm. Currently the truck unlocks with the alarm and automatically locks after the truck is started.

I have actuators with 2 wires connected to the alarm and was wondering how I can add a switch to unlock/lock the truck while it is running. The wires on the actuators are blue and green and I bought a switch kit (http://www.a1electric.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=AEOS&Product_Code=DLSW-1) that has 3 wires on it.

 

[Steve83]

You need the wiring diagram for the Viper module. If it has simple Lock/Unlock inputs, wire the switch kit to those. If not, you'll have to wire in a power switch (at least 4 terminals, up to 6; OR two switches with 3 terminals each) to drive the actuators.