newguyinnc
OBS Enthusiast
- Joined
- Jun 1, 2014
- Messages
- 51
- Reaction score
- 14
Hey all, have a 1998 k2500 454/4l80e truck that has a bent frame. Motor and transmission both rebuilt with under 15,000 miles on them. I also have a 1998 k1500 with the 5.7/4l60e , motor has a spun rod bearing. Question is, seeing as though both trucks are 1998 and already own them both , can I just disconnect the wiring harness from the 454 truck at the firewall and transplant drivetrain , ecu , and harness into the k1500 without having to mess with wiring inside the cab? Worst case scenario I could swap out the cabs, but they're different colors, so trying to avoid that if possible. Not worried about axles and suspension. The 454 was rebuilt bone stock and I don't abuse the truck.