badassformula383lt1
OBS Enthusiast
- Joined
- Apr 30, 2010
- Messages
- 68
- Reaction score
- 5
Hey i replaced my upper ball joints 2nd time now went with moog parts this time lol. I also replaced my right side tie rod end and finally installed my sway bar. Previous owner left it loose un attached. Well after all that it looks as if it has toe in and the front end sits like its binding up like the tires are resting on the out sides. Would the pressure from the sway bar push down on the lower control arms and do this? It may not actually have toe in but being the top of the wheels are being pushed out and lowers are being pushed in it may cause this. The truck has a 6.5 dick cepek and 3 inch body lift on 37s with the bars cranked up it sits bull dog a bit. basically if i drove it far it would prolly eat up the out side of the tires. Previous issue i had with it was when i turned the wheels would lean in hard and look scary. Was trying to solve this issue. Working on finding a alignment shop that can work with that size tire but truck drives as straight as ever still.
thanks for any info google didn't help much. Tie rod was put on exactly the same turns as the old one came off on.
thanks for any info google didn't help much. Tie rod was put on exactly the same turns as the old one came off on.
Last edited: