Replaced Stabilizer Bar Bushings

[steveed]

Just replaced my stabilizer bar bushings and I guess they were a bit worn out. Seems like the link was slowly wearing away.

You must be registered for see images attach

 

[GoToGuy]

Did you do the inner bar and the end links. Yeah your end links are toast. Good call!

 

[steveed]

Yeah I did the inner bar and end links. The new inner ones are poly and have zerk fittings.

 

[Schurkey]

They do that when the rubber inserts on the end links wear out or have too-little preload. Normally, that part of the bolt would be shielded by the rubber or Polyurethane end-link bushing.

If you'd look close, you'd probably find indications of wear on the hole it goes though.