Randy Curran
Newbie
- Joined
- Nov 24, 2015
- Messages
- 28
- Reaction score
- 6
OK, so my gas gauge in my '98 is doing the humming bird dance. So I figure its the stepper motor and I have access to a parts truck (also a '98) so I remove the dash and bring it home. I take out my dash, replace the motor which is held in place by some really small screws. I then pop it back in the dash and now nothing works right! The tach starts at 2000 rpm and goes from there, the speedo doesn't move at all and the all the other gauges just don't register correctly.
Now some new truck have a plug that the cluster plugs into but but mine just has a plug that is part of the dash and you just push the cluster in.
What the hell did I do wrong?????? And by the way the only thing that works right is the odometer.
Signed gaugeless in Indiana.
Now some new truck have a plug that the cluster plugs into but but mine just has a plug that is part of the dash and you just push the cluster in.
What the hell did I do wrong?????? And by the way the only thing that works right is the odometer.
Signed gaugeless in Indiana.