Quick question about seats

[polar]

Alright so I found some bucket seats from a 96 Tahoe and was wondering if they will bolt in directly in for my 60/40 seats

 

[94Sierra4x4]

You'll need to drill two holes I'm fairly certain.

Driver seat will bolt in just fine, but the 60 side will need two holes drilled. I think there a depressions in the floor where you would drill, but don't quote me

 

[DR CHOP]

Yep! You will have to drill a couple of holes on the 60 side. Bolt it in the two otters and then mark the centers for drilling.

 

[sewlow]

Put the biggest washers you can get on the bottom side of the new bolts, or weld some plates in there, if you can. You don't want the bolts pulling out if you are ever (hopefully not...) in an accident.