Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Are you talking about the heim joints on top of the rear end? If so those are rubber dust seals.What kind of rod ends are those? maybe its just the picture but do they have rubber bushings on the ends?
Yea Ive installed quite a few on my rig and others. where did you get them? I order my heim joint / rod ends same same lol from Barnes 4x4. but none of theirs come with dust boots . I assume yours are Teflon self lubricating?Are you talking about the heim joints on top of the rear end? If so those are rubber dust seals.
These came from speedway motors.Yea Ive installed quite a few on my rig and others. where did you get them? I order my heim joint / rod ends same same lol from Barnes 4x4. but none of theirs come with dust boots . I assume yours are Teflon self lubricating?
Thats interesting. Your application is different obviously I just never seen them come on any ive ordered.These came from speedway motors.You must be registered for see images attach
Cool man! We narrowed the rear end eight inches and welded in the four link kit. Now just wait for the coil-overs to show up.Nice set up. I was thinking about doing this. Moving my tank to rear, and leave space for wider tire by bringing the links on the inside of the frame.
I can't wait to see the finished product. My project will be on hold while I build up funds for it. Got a promotion and it will keep me busy for a while, but once I get back to thrashing I'll have the dough to get everything I'm needing, even upgrading my welder. Hopefully even kick in a nice plasma cutter for my garage.Cool man! We narrowed the rear end eight inches and welded in the four link kit. Now just wait for the coil-overs to show up.