need help w removing abs on 96-99 vortec..Pls help

[JBLOOM33]

Ive tried searching but all i keep getting is the removal for the 88-94.. can someone help me out w a link or just some info.. it would be greatly appreciated

 

[freeze]

what part of the abs are you trying to remove?

 

[dkennedy]

Why do you want to remove the ABS? After dealing with it on my Windstar I'm not a big fan of the ABS stuff either, but never thought about removing it.

 

[JBLOOM33]

im bagging my truck and just finished tubbing the firewall so im looking to remove the abs unit under the hood.. do i need a diff proportioning valve or do i remove the lines from the abs and bolt them to the master cyl? thx.. its a 97ecsb gmc sierra

 

[freeze]

I have also had problems with the ABS in my 2000 S-10 blazer. Pain in the ass. Never have done a removal either but this may be a start: http://www.tahoeyukonforum.com/forum/showthread.php?t=13540 http://www.pirate4x4.com/forum/chevy/764456-abs-system-removal-how-too.html http://www.summitracing.com/search?keyword=proportioning valve&dds=1 Also some thoughts on legality and safety: http://www.s10forum.com/forum/f42/is-deleting-abs-illegal-369058/ I am definitely no expert on this stuff but hope it helps.

 

[1ugly88]

we did it to a buddys truck. i picked up a master cylinder and a prop valve from my old 88. bolted it in and replumbed the lines to the prop valve. a little bleeding and one abs bulb removed and viola!!!! no more abs. someday i'll do it to my yukon cause the abs box took a dump.

 

[CUSTOM06]

Any pics on how you plumbed the prop valve?

 

[1ugly88]

Any pics on how you plumbed the prop valve?

i'll see if i can get him to stop by today and grab a pic.

 

[JBLOOM33]

that would be great to get a pic..