I have a 1996 C1500 ext cab that used to have a custom overhead console. It was there when we bought it new. It is two maplights and a cigarette lighter and they all worked fine. It got pretty beat up so I took it down and got a stock overhead console instead. I got constant power from the dome light via the orange wire and ground from the white wire. I soldered in a two pin connector and plugged it to the stock connector on the console. The problem is the front maplights only work when I open the door or use the switch on the dash. They don’t work if I press the button on the console itself. This isn’t the case with the rear dome light. That works normally with no issues. Any ideas?
Here is a video showing what I mean
Here is a video showing what I mean
xc_hide_links_from_guests_guests_error_hide_media