Does anyone know where I can get the Silverado decal that goes on the door inside? I found all kinds of door post decals but can't find this one that ran away a couple years ago.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Yeah, I'm afraid the 32 year old plastic might not like it, ha ha.You do know most of the interior parts you painted comes off fairly easily, IIRC......
Nope, I have the Summit Racing aluminum heads. I posted most of what I did to the engine in the 1st few of this thread.Do you still have the original swirl port heads on the motor?
I figured I'd try something - I took a piece of 3/16" X 3/4" weatherstripping (I used to help reduce wind noise on my door) and stuck it on the side of the housing.Does anyone have a good trick to tighten them up?
Here's a little history with my old muffler; it started rusting out making my exhaust louder but it didn't sound good. Here we pounded it back close.For now, I wound up using the 3" - 3 chamber "Performance Muffler" the PO installed before I bought it.
Yeah, I'm afraid the 32 year old plastic might not like it, ha ha.
Nope, I have the Summit Racing aluminum heads. I posted most of what I did to the engine in the 1st few of this thread.
Edit: The engine build starts on post #3