Motor Pull

[Travis Shepherd]

Since you are changing the engine, maybe, go ahead and remove the intake to gain access to tranny bolts & everything in front of the engine for more wiggle room.

New motor is already in as well as the tranny, haven’t run it just bolted it up then my buddy said the torque converter shouldn’t have been on the motor so tonight will separate the two and put it on the trans first


Sent from my iPhone using Tapatalk Pro

 

[Travis Shepherd]

Pulled her all apart to make sure she is seated and filled properly

You must be registered for see images attach

Sent from my iPhone using Tapatalk Pro

 

[Travis Shepherd]

All is intact still too

You must be registered for see images attach

You must be registered for see images attach

Sent from my iPhone using Tapatalk Pro

 

[Oldblue98]

All is intact still too

You must be registered for see images attach

You must be registered for see images attach

Sent from my iPhone using Tapatalk Pro

Just curious Travis, did you put a new front seal in transmission, now would be the time if not.

 

[Travis Shepherd]

Just curious Travis, did you put a new front seal in transmission, now would be the time if not.

Yes I did, came in a lot with some other gaskets as well. I appreciate it


Sent from my iPhone using Tapatalk Pro

 

[Oldblue98]

Yes I did, came in a lot with some other gaskets as well. I appreciate it


Sent from my iPhone using Tapatalk Pro[/QUOTE

How did it turn out Travis are you driving it now ?