Awest623
A juicy girl got me, again
I have an l31 with a chevrolet performance 14097395 (ht383) cam & 1.6 ratio rockers. I'll be dropping the 96-98 whipple onto it soon. Looking for a recommendation on heads (preferably aluminum & complete). I'll be honest, I don't know much about heads so any advice is appreciated.
Edit: I would like to keep the same bolt pattern as the vortec heads, don't plan on changing up my intake.
Cam specs:
Duration at 050 inch Lift: 196 int./206 exh.
Advertised Duration: 288 int./308 exh.
Valve Lift with Factory Rocker Arm Ratio: 0.431 int./0.451 exh.
Valve Lift with 1.6 Ratio Rocker Arms: 0.460 int./0.481 exh.
Lobe Separation (degrees):109
Edit: I would like to keep the same bolt pattern as the vortec heads, don't plan on changing up my intake.
Cam specs:
Duration at 050 inch Lift: 196 int./206 exh.
Advertised Duration: 288 int./308 exh.
Valve Lift with Factory Rocker Arm Ratio: 0.431 int./0.451 exh.
Valve Lift with 1.6 Ratio Rocker Arms: 0.460 int./0.481 exh.
Lobe Separation (degrees):109
Last edited:
