Lower control arm bolts

[Nick94]

I rebut he LCA and after reinstalling everything I realized I swaped the bolts for the LCA. My question, do you think I can replace the bolt without removing he spindle spring etc?

I was going go use a floor jack and support he arm while I change the bolts. Ps I am thinking going to he dealership and buy another long bolt and replace it for he shortbone I used.

 

[ChrisAU]

Yeah use a jack to hold it up, you'll be fine. Just be careful. Make sure the sprung weight of the LCA is centered on the jack.

 

[Nick94]

Yeah use a jack to hold it up, you'll be fine. Just be careful. Make sure the sprung weight of the LCA is centered on the jack.

Thank you for the feedback. I was thinking about placing the jack under the bolt, but yout advice make perfect sense. Thank you again.