Blanco_obs
I'm Awesome
Okay. Got this 1995 Chevy Silverado from my job 2 years ago. It was abused like hell but I seen a lot of potential. Now my issue and always has been my issue was voltage!!! At startup I would sit at 14 volts. Once you add loads. It goes down. To is says 10-12 volts. Found some bad and missing grounds. I added engine to frame. Body to frame engine to battery. That was 2 years ago. Also replaced the battery and alternator. Seemed to be a little better but not the best. Once I installed my leds I realized that once the voltage gets below 11 it would hyper flash. I have resistors to make it not hyper flash. Got tired of it messed with some more grounds. Fallowed some guy on YouTube he had a similar issue but notqiite. He installed the big 3 and a 140 amp altenator. Which I replaced my ground wire and positive wires with oem wires . Since this quarantine I haven’t been driving it. I went to drive it today and it seems the voltage is going crazy again. I’m at a loss. Idk what else to do. Could my cluster be the issue ?? Since if I remember it regulates the alternator ? Please help lolp