Installing filter on power steering system - which way does the fluid flow at the brake booster?

[TexasAggie]

I'm installing a filter for the power steering system. It is a directional filter and I don't know which way the fluid flows at the hydroboost booster. Can anyone fill me in?

 

[RichLo]

You must be registered for see images attach

 

[Schurkey]

Make certain you have it on the low-pressure return hose, not on a high-pressure hose.

"I" would install it near the PS reservoir to eliminate that potential explosion.

 

[TexasAggie]

I was planning to install it on the hose that is clamped to the hydroboost unit. Which way does fluid flow through this hose?

 

[movietvet]

Generic at best:

You must be registered for see images attach

 

[Keeper]

Mine is on the blue pump feed line

 

[GoToGuy]

The hose that returns to the tank very low pressure. Your not an aircraft so no high pressure filters/ screens.

 

[GM Guy]

Ive always heard to plumb it to the cooler return, as the return from the brake booster needs to have zero restriction or else it might hang the brakes slightly.

 

[HotWheelsBurban]

Ive always heard to plumb it to the cooler return, as the return from the brake booster needs to have zero restriction or else it might hang the brakes slightly.

Good to know, I want to do this on my one ton.... along with about sixteen other things LoL. Jus gotta have $$$$.....

 

[GoToGuy]

The line the returns to reservoir, it won't have high pressure fittings, hardware, it's low pressure return. Or if you have the power steering cooler, install in the line that returns to reservoir. That's where mine is installed.