whytry
OBS Enthusiast
- Joined
- Feb 17, 2015
- Messages
- 55
- Reaction score
- 4
hello, I did a motor swap and in process did intake manifold gaskets and new mpfi as well. So that meant pulling the dist. I thought I had it marked properly put it in and now car won't start. I turned motor to #1 tdc pulled cap off rotor and its pointing here. Which is not at 1 or 6.... from what I can tell there isn't enough adjustment on dist cap to be able to adjust it accordingly. It hit the intake manifold. It pops thru intake now. Any advice is appreciated.
See what I mean it's pointed at closer to 8 than anything.
See what I mean it's pointed at closer to 8 than anything.
You must be registered for see images attach