PlastiKTuneR
Newbie
- Joined
- Dec 24, 2011
- Messages
- 24
- Reaction score
- 0
1998 Chevy suburban, 4x4 325,***. Recently installed a zone offroad 2" lift kit. It consisted of keys and blocks. A couple days.after installed I go in to get an alighnment, after waiting a half hour the mechanic comes out, and says he can't do it.
He explains that my off angled front wheels ( they are dipped in at the top, the inside will wear faster ) can't be fixed unless my ball joints, steering box and somthing else was fixed.. I know cranking is.bad, but when I measure, the amount of lift gained was just under 2" all around..
Is this guy full of ****?
Also, does anyone know where I can purchase high angle ball joints so this isn't a future issue.
He explains that my off angled front wheels ( they are dipped in at the top, the inside will wear faster ) can't be fixed unless my ball joints, steering box and somthing else was fixed.. I know cranking is.bad, but when I measure, the amount of lift gained was just under 2" all around..
Is this guy full of ****?
Also, does anyone know where I can purchase high angle ball joints so this isn't a future issue.