MOBS
The Mad Scientist
Ok, let me check what your amp states and I can give ya an idea of what to do with it....wait, you have an 8ohm P1?! ooooo....shame on you!
Go to page 9, diagram on left looks like what you're wanting to do: http://www.voxxsupport.com/images/User Manuals - FAQ's/LXA600_DOC_OM.pdf
Unfortunately, with that svc 8-ohm sub, there's nothing I can do to help you get that full power to your sub like you'd get with a 4-ohm svc sub. If ya ran another 8-ohm P1, you could wire them in parallel together to mono then your amp would be seeing 4-ohms, but it would then have 2 subs to power versus one. The only difference is you'd be a lil louder with 2 subs than with 1.
Go to page 9, diagram on left looks like what you're wanting to do: http://www.voxxsupport.com/images/User Manuals - FAQ's/LXA600_DOC_OM.pdf
Unfortunately, with that svc 8-ohm sub, there's nothing I can do to help you get that full power to your sub like you'd get with a 4-ohm svc sub. If ya ran another 8-ohm P1, you could wire them in parallel together to mono then your amp would be seeing 4-ohms, but it would then have 2 subs to power versus one. The only difference is you'd be a lil louder with 2 subs than with 1.
Last edited: