- Joined
- May 7, 2013
- Messages
- 122
- Reaction score
- 25
Ok so I got some of my python 5106p wired up but the remote start wires are throwing me a curve ball? Ok so here’s what I thought so y’all chime in and tell me If I’m thinking right cause my headache is not helping any on the thought process today, lol. So I need some help guys I also posted pics of the full layout of all harness/paperwork below.
So this is what I have so far.....on the 10-pin remote harness
H3/1 pink —— to pink wire on steering ignition harness
H3/2 red/white —— not used?
H3/3 orange —— to orange acc wire on steering ignition harness
H3/4 violet —— cut purple wire on steering ignition harness ( this goes to the one side goin to starter)
H3/5 green —— this goes to the other side of the cut purple wire on ignition harness
H3/6 red —— not used?
H3/7 pink/white —— not used?
H3/8 pink/black —— not used?
H3/9 red/black —— not used?
Now on the other 24 pin harness here’s what I got
#4 —black/yellow ——wired this to a relay and tied dome wire off of dimmer switch white wire for a signal
#9 —grey —— wired to hood pin switch
#12 —violet/white —— wired to one of the white wires off the ignition coil....? (Is this correct for tach signal)?
#13 —black/white —— wired to ground under dash....
#16 —Brown/Black —— wired to oem horn black (-) wire on steering column ignition harness
#20 —Brown —— wired to white (+) at brake switch under dash
As for the Main 6-pin and 3-pin door locks harnesses are done got them covered .....am I missing anything for basic wire up? Thanks in advance guys and I really appreciate any help with this .......
So this is what I have so far.....on the 10-pin remote harness
H3/1 pink —— to pink wire on steering ignition harness
H3/2 red/white —— not used?
H3/3 orange —— to orange acc wire on steering ignition harness
H3/4 violet —— cut purple wire on steering ignition harness ( this goes to the one side goin to starter)
H3/5 green —— this goes to the other side of the cut purple wire on ignition harness
H3/6 red —— not used?
H3/7 pink/white —— not used?
H3/8 pink/black —— not used?
H3/9 red/black —— not used?
Now on the other 24 pin harness here’s what I got
#4 —black/yellow ——wired this to a relay and tied dome wire off of dimmer switch white wire for a signal
#9 —grey —— wired to hood pin switch
#12 —violet/white —— wired to one of the white wires off the ignition coil....? (Is this correct for tach signal)?
#13 —black/white —— wired to ground under dash....
#16 —Brown/Black —— wired to oem horn black (-) wire on steering column ignition harness
#20 —Brown —— wired to white (+) at brake switch under dash
As for the Main 6-pin and 3-pin door locks harnesses are done got them covered .....am I missing anything for basic wire up? Thanks in advance guys and I really appreciate any help with this .......
You must be registered for see images attach
You must be registered for see images attach