atyates
I'm Awesome
So I noticed my brakes slowly getting worse. So I decided to bleed them, because the calipers, lines ,pads ,rotors and shoes are fairly new. So I bled my rear and they were fine. When I got to my front passenger side I had my wife in the truck pumping and holding the brakes, barely any fluid came out the bleeder screw. I tightened it back up, had her pump and hold the brakes again with the same result. So I disconnected the brake line from the caliper and had a ton of fluid come out. So why isn't the fluid getting to the bleeder screw on the caliper? I then did the front driver side and had plenty of fluid come out the bleeder screw so it's just the passenger side