I did my frame (after sandblasting) with three coats of SPI epoxy primer (Southern Polyurethanes) which is UV stable and does not really need a top coat. It has a cult following on the hot rod side. Just another option to consider.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I did my frame (after sandblasting) with three coats of SPI epoxy primer (Southern Polyurethanes) which is UV stable and does not really need a top coat. It has a cult following on the hot rod side. Just another option to consider.