Stepside_fever95
I'm Awesome
Have you contacted ebay about it?Aaannndddd still no response from that seller. This is aggravating.
Sent from my SM-G920V using Tapatalk
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Have you contacted ebay about it?Aaannndddd still no response from that seller. This is aggravating.
Sent from my SM-G920V using Tapatalk
No. I didn't think to since I already have them, I didn't think they would do anything about it.Have you contacted ebay about it?
No. I didn't think to since I already have them, I didn't think they would do anything about it.
Sent from my SM-G920V using Tapatalk
So I just bought the k2xx mirrors for my 97 and they a 4 pin connector and when plugged into the factory harness they do not work, and so I tried repinning them to get them working and no matter what combination I tried it only goes right and not any other directions. The 4 colors on the mirror wires are green, yellow, red, and red with orange stripe. So I am kind of stumped now and I am wondering if one of you guys have a solution or the same problem. Thanks
Yah it's just wierd because I've never heard of this problem with the old style. Guess I'll stick with them for nowThis is a classic example of why some cheap China-made things are fine, and others are not. Kind of had a bad feeling about these with all the vibration they have to endure. Hope you all get it worked out with the seller, good luck. Dealing with CS based in China can be extremely frustrating, ask me how I know...
They should. Because you are not 100% satisfied and one broke and the seller is ignoring you. It's worth a shot to contact them.
I have a mirror wiring diagram on my laptop at the house. I'll post it when I get home. But basically, 2 wires are a common "ground' that splits off one pin on the switch and the other two are the separate power side connections.
The common wires have to be connected right to get the movements if not it will only go one way.