No, sorry. I really don't do YouTube or videos for that matter.PlayingwithTBI, in post #2 you say you had a chambered and then installed a Bolra muffler on your truck, do you have a video or audio off truck running with both on it? like before and after?
I have a Thunderbolt 3 Cat from Amazon but, it looks like it's NLA. Here's one about the same size.Also what high flow cat and what cam?
xc_hide_links_from_guests_guests_error_hide_media
I have the Summit Racing 162108 aluminum heads, a Lunati Voodoo 10120700LK flat tappet cam with Proform 1.6 full roller rockers giving me .466/.484" lift, 207/213° @ 0.050" (a little more duration with 1.6 ratio)
When I built this, I was planning on passing emissions so, I could always go down to 1.5 rockers and de-tune it a little to make it work. Now, I'm exempt with Historic Plate and Collector Car insurance. It turns out I could have gone roller cam since my block has the bosses for the spider and drilled for the cam plate - perhaps some day...