sewlow
Bitchin' Stitchin'
You can just cut it followed by a squirt of some paint. The boxing that we did was the 'over-kill' I was referring to. Lol!
We drew out the shape first, then drilled holes in the corners where the shape changed direction. The holes help to prevent any possible cracking in the corners.
To cut out the metal, we used one of these with a cut-off disc.
We drew out the shape first, then drilled holes in the corners where the shape changed direction. The holes help to prevent any possible cracking in the corners.
To cut out the metal, we used one of these with a cut-off disc.
You must be registered for see images attach