Do I need anything else?

[Parentnoia]

Getting ready to order what I need to replace my fuel injectors, just want to make sure I order everything I need at once so I'm not sitting around waiting on parts.

Fuel Injector Assembly: http://www.summitracing.com/parts/dfp-fj10566/
Gaskets: http://www.summitracing.com/parts/fel-ms90269


Should I need the Delphi hold down bracket that they suggest?

Also, I need to replace my driver side front shock, so while I'm at it I might as well replace all four, front and back.

Any suggestions? I was wanting 5100s for the rear, but I'm baffled about the front. Plus, are there any good variable lift shocks? All I can find are stock or already lifted. I dont want to have to replace the shocks again once I put a lift on, down the road sometime.

 

[kamokevin]

Getting ready to order what I need to replace my fuel injectors, just want to make sure I order everything I need at once so I'm not sitting around waiting on parts.

Fuel Injector Assembly: http://www.summitracing.com/parts/dfp-fj10566/
Gaskets: http://www.summitracing.com/parts/fel-ms90269


Should I need the Delphi hold down bracket that they suggest?

Also, I need to replace my driver side front shock, so while I'm at it I might as well replace all four, front and back.

Any suggestions? I was wanting 5100s for the rear, but I'm baffled about the front. Plus, are there any good variable lift shocks? All I can find are stock or already lifted. I dont want to have to replace the shocks again once I put a lift on, down the road sometime.

You can get it much cheaper on Amazon http://www.amazon.com/dp/B000TYLIFS...UTF8&colid=G39X0D5ETZP6&coliid=I2WUAEF6FXL3DT and if you're patient the price drops to about $250 every once in a while. I believe I read your stock bracket will work, and if it doesn't the delphi unit should come with it. Fel-Pro makes good gaskets. As far as I know that's all you need.

I've tried my hardest to find 5100's that will fit a stock height front end. I can't find any that have the proper extended and collapsed lengths. I would suggest the 4600's; not sure about any variable lift shocks.

 

[Parentnoia]

Yeah, I just thought of the fact that when I do get a kit, it comes with shocks.

Also, it states that it does not come with the Delphi bracket.

 

[grampadirt]

The Delphi FJ10566 I installed had the bracket in the box.

 

[grampadirt]

This might help you some,it's a write up of how I did the conversion on wifey's '99 burb.There are many write ups about this project,this is how I did it.

http://www.truckmodcentral.com/forums/f36/well-ill-damned-wifeys-burb-alive-how-kind-18288/

 

[Parentnoia]

Front: http://www.summitracing.com/parts/bsn-24-186735
Rear: http://www.summitracing.com/parts/bsn-24-185783

Will those fit without issue?

 

[Parentnoia]

Fuel injector is in, now I'm just waiting for the gasket set and then a day off, which is Wednesday and Thursday.

 

[Parentnoia]

7 hours later... and I still havent finished... managed to get the new fuel injectors in, and that's it...

 

[Parentnoia]

Took a couple hours today, but it's done. Runs and idles better. Now to work on the play in the steering and the spongy brakes.