jps4jeep
I'm Awesome
Another simple solution for the steering, just drill out the knucles and run heims or just use hi-steer arms. Also some FSJ jeep D44 fronts had flat top knucles, neither side were milled, but usually can be found cheap.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
im goign to find a set of matching ones but now im going to get the t case first. start cleaning the axle up and get the springs from yard. then get the spring hangers and figure out the steering then ill start the final planning. interested in how your goinng to mke the linkage on t case work. i havent figured that out yet. when i do it ill mostlikely get the axle in and all that working and right then swap the t case.
no one asked... maybe im just slow or missed something.. lol What truck is this for? im guessing the '92 RCSB ?
73-76 chevy dana 44 knuckles are what you seek, i know my dad had gotten 72 blazer parts out there in richmond while visiting my aunt years ago, i think the place was called woodfin or something like that, perhaps they have the knuckles therethe thing is that id liek to keep the stock floor shifter location. i like how it looks. ill have to figure that one out when i get the cases swaped. having trouble finding a set of knuckles close to me. trading the bumper tomorrow for axle so ill start cleaning that up slowly but im about to start taking the body lift off and my trans out to rebuild it at work so all my progress will be slowww