FourEightZero
OBS Enthusiast
Finished the interior, engine bay pic, redid the front end suspension, stripped all the paint and primered it.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
That's one interesting project!Finished the interior, engine bay pic, redid the front end suspension, stripped all the paint and primered it.
You must be registered for see images attach
So I took the 'Ol Burban on another Storm Chasing excursion (a week and a half ago).
You must be registered for see images attach
This time I ended up in Eastern KS, and joined up with a group of fellow amateur chasers from the university of Oklahoma.
You must be registered for see images attach
In the span of 3 days I managed to pound another 1500 miles on this truck (not too shabby for a 325,000 mile motor).
You must be registered for see images attach
xc_hide_links_from_guests_guests_error_hide_media
Yeah, the storm was tornado warned and moving at 70mph right for us. There had also been reports of golf ball sized hail, so we had to get out of there quick to avoid it.everyone was getting out of there and you and the burb just held strong hahaha
Ever since the manual swap, I can't seem to resist dumping the clutch and letting her sing.haha damn dude almost ended up in another ditch!
I've seen this and would also like to know if anyone, ever at any time have used these and how? (Pics?)ok i just went out and looked at my bed there are 3 indentions in the side of the bed just above wheel well height that i guess you would put 2x6"s across or just run a plank across the ridge to make a two tiered deal. has anyone ever used this or done this?
Yup, long beds got 4 of those. My bedliner has the indentations too. Was a new thing for the 400s.You must be registered for see images attach
this is from the 96 brochure someone posted in another thread. what is the haaaiiillll is this?!
ok i just went out and looked at my bed there are 3 indentions in the side of the bed just above wheel well height that i guess you would put 2x6"s across or just run a plank across the ridge to make a two tiered deal. has anyone ever used this or done this?
You must be registered for see images attach